Eemax™ Electric Tankless Water Heater, Series: LavAdvantage™, 240 VAC, 20 A, 4800 W, 1 ph, 3/8 in Compression Water Connection, Nickel Chrome Heating Element, Energy Factor: 0.99, 14 AWG Wire, Wall Mount, 0.35 gpm at 94 deg F Rise Recovery, 30 to 150 psi, 70 to 140 deg F, ASME Yes/No: No, White, 5-1/4 in W x 3 in D x 9-3/4 in H, Commercial Commercial/Residential/Dual, Domestic
| Series | : | LavAdvantage™ |
| Voltage Rating | : | 240 VAC |
| Amperage Rating | : | 20 A |
| Power Rating | : | 4800 W |
| Phase | : | 1 ph |
| Water Connection | : | 3/8 in Compression |
| Heating Element | : | Nickel Chrome |
| Energy Factor | : | 0.99 |
| Wire Size | : | 14 AWG |
| Mounting Type | : | Wall |
| Recovery Rate | : | 0.35 gpm at 94 deg F Rise |
| Pressure Rating | : | 30 to 150 psi |
| Temperature Rating | : | 70 to 140 deg F |
| ASME Yes/No | : | No |
| Color | : | White |
| Dimensions | : | 5-1/4 in W x 3 in D x 9-3/4 in H |
| Commercial/Residential/Dual | : | Commercial |
| Domestic/Import | : | Domestic |
- On demand hot water - No delay
- Cut energy waste - Flow switch activates heater only when water is running, no standby heat loss
- Endless hot water - no storage capacity to deplete
- Reduces installation cost and material - No temperature and pressure valve required
- Select models supplied with a PCA flow restricting aerator - ensures proper volume and effective flow
- Easy installation - Simple compression fittings that require no soldering, unit mounts directly to the wall with common hardware
- Prevents legionella bacteria growth
- Reduces calcification and sedimentation
- The wetted surface of this product contacted by water contains less than 0.25% lead and meets ANSI/NSF 372
- 0.2 gpm turn-on
- Replaceable cartridge bare wire element
- Bottom plumbing configuration
- Multiple lavatory, factory set to 110 deg F
- Microprocessor temperature control Point-Of-Use
Instruction/Installation Manual